Purkuohje tuon räjäytyskuvan mukaan menee lontooksi seuraavasti:
Dismantling the rear drive transmission box (fig.110)
-Undo screws <A> with washwers <B> and remove the hollow shaft withn brake disc <C>.
-Undo screws <E>, with crinkled washer <F> and take off the complete casing cover <G> gasket <H> and shim <I>.
From cover <G> take off circlip <L> from its housing on the hollow shaft <D> and remove:
-Roller bearing <N>
-bearing inner race <M> usin puller No.19907000
-shim <O>
-washer <P>
-undo screws <R> with their flattening flaps
crown wheel <Q>
- Take out bearing <U> from cover <G> and hollow shaft <G>. Tap this out lightly with a plastic mallet; remove seal ring <S>
-Using suitable punch take out bearing <U> from cover <G>
-Using special no. 19927500 remove outer race from roller bearing <V> from housing remove seal <A-B> and washer <A-C>
Tässä vielä kuvat ulosvetäjistä, jotka tekstissä mainitaan.
