Gruppo MOTO GUZZI Finlandia Foorum
Yleinen keskustelu => Tekniikkapalsta => Aiheen aloitti: MarkkuEVP - Huhtikuu 16, 2014, 20:31:21 ip
-
Tälläista kyselevät
Hi all, I am still having spark trouble on my cali 1100i. There is no spark on either side. According to Guzziology you can remove the stand switch by unplugging it from the loom and that eliminates that potential source of problem, I have done that. The next port of call was the immobiliser but as that cuts power to the fuel pump and it is working fine so I have ruled that out. Next on the list is the ignition sensor. I have removed the sensor and cleaned a little gunk and a little swarf from it but not very much. I want to test the sensor but don't know how to test it and what results to expect one way or the other. Any help or suggestions would be appreciated.